CAI Ammeter
IMPORTANT INFORMATION
- Under no circumstances should
any connection be made to the
negative side of the battery.
- Disconnect your
vehicle’s battery prior
to installation.
Wiring
See diagram
- Connect terminal A to the
positive side of the
alternator.
- Connect terminal B to the
positive side of the battery
(do not break or splice into
the starter feed, but the
wire which provides power to
the rest of the electrical
system)
Illumination
- Assemble bulb into holder
- Install bulb and holder into
the lamp aperture at the rear
of the gauge.
- Connect one wire from the
bulb and holder assembly to
the power feed for the fascia
lighting, connect the other
wire to earth/ground via the
vehicle chassis/body.
Installation
These gauges require a 2 1/16inch
(52mm) hole in the fascia panel.
Insert the gauge into the hole and
secure with the fixing clamp, washers
and knurled nuts supplied.
|
